IDEAL INDUSTRIES Cooktop IZGS 68 ICTX User Manual

Gas Hob  
IZGS 68 ICTX  
EG  
 
Thank you for selecting our appliance  
We wish you lots of enjoyment with your new appliance and we hope that you will  
consider our brand again when purchasing household appliances.  
Please read this user manual carefully and keep it throughout the product life cycle  
as a reference document. The user manual should be passed on to any future owner  
of the appliance.  
2
 
Contents  
For the User  
Important Safety Information ............................................................................. 4  
Description of the appliance .............................................................................. 6  
Operation .......................................................................................................... 7  
Using the hob.................................................................................................... 8  
Cleaning and Maintenance ................................................................................ 9  
Service and Original Spare Parts ..................................................................... 19  
For the Installer  
Technical data ................................................................................................. 10  
Installation ....................................................................................................... 12  
Gas Connection .............................................................................................. 13  
Electrical Connection....................................................................................... 15  
Building In ....................................................................................................... 17  
Possibilities for insertion .................................................................................. 18  
Guide to Use the instructions  
The following symbols will be found in the text to guide you throughout the  
Instructions:  
Safety Instructions  
Step by step instructions for an operation  
Hints and Tips  
Environmental information  
This appliance complies with the following E.E.C. Directives:  
2006/95 (Low Voltage Directive);  
2004/108 (Electromagnetical Compatibility Directive);  
90/396 (Gas Appliances) and subsequent modifications.  
MANUFACTURER :  
ELECTROLUX ITALIA S.p.A.  
C.so Lino Zanussi, 30  
33080 Porcia (PN) - ITALY  
These instructions are only for the countries stated by the symbol printed on  
the front cover of this instruction book.  
3
 
English  
Important safety information  
This warnings has been given for the safety of you and others. We therefore  
ask you to carefully read the procedures of installing and using this cooker.  
contact with it and keep them far  
enough from the heated parts of this  
appliance.  
Installation  
The work of installation must be  
carried out by competent and qualified  
installers according to the regulations  
in force.  
• If the appliance is out of order,  
disconnect it from the electric supply.  
• Any modifications to the domestic  
electrical mains which may be  
necessary for the installation of the  
appliance should be carried out only  
by competent personnel.  
People Safety  
• This appliance has been designed to  
be operated by adults and children  
under supervision. Young children  
must not be allowed to tamper with the  
controls or play near or with the oven.  
During Operation  
• This appliance is not intended for use  
by children or other persons whose  
physical, sensory or mental capabilities  
or lack of experience and knowledge  
prevents them from using the  
appliance safely without supervision or  
instruction by a responsible person to  
ensure that they can use the appliance  
safely.  
• Accessible parts of this appliance may  
become hot when it is in use. Children  
should be kept away until it has  
cooled.  
• This appliance has been designed for  
non professional purpose in private  
houses only. It is meant to cook edible  
foodstuff only and must not be used  
for any other purposes.  
• It is dangerous to alter the specification  
in any way.  
• For hygiene and safety reasons, this  
appliance should be kept clean at all  
times. A build-up of fats or other  
foodstuff could result in a fire.  
• Under no circumstances should you  
attempt to repair the appliance  
yourself. Repairs carried out by  
unexperienced persons may cause  
injury or serious malfunctioning. Refer  
to your local Service Centre. Always  
insist on genuine spare parts.  
About Installation, Cleaning and  
Maintenance  
It is mandatory that all operations  
required for the installation are carried  
out by a qualified or competent  
person, in accordance with existing  
rules and regulations.  
• Ensure that all control knobs are in the  
OFF position when not in use.  
• Should you connect any electrical tool  
to a plug near this cooking appliance,  
• Disconnect the appliance from the  
electrical supply, before carrying out  
any cleaning or manteinance work.  
ensure that electric cables are not in • Ensure a good ventilation around the  
4
 
appliance. A poor air supply could  
cause lack of oxygen.  
• Ensure that the gas supply complies  
with the gas type stated on the  
identification label, placed near the gas  
supply pipe.  
Environmental Information  
After installation, please dispose of  
the packaging with due regard to  
safety and the environment.  
• When disposing of an old appliance,  
make it unusable, by cutting off the  
cable.  
• This appliance is not connected to a  
combustion products evacuation  
device. It must be installed and  
connected in accordance with current  
installation regulations. Particular  
attention shall be given to the relevant  
requirements regarding ventilation.  
The use of a gas cooking  
appliance results in the production  
of heat and moisture in the room in  
which it is installed. Ensure that  
the kitchen is well ventilated: keep  
natural ventilation holes open or  
install a mechanical ventilation  
device (mechanical extractor  
hood).  
Prolonged intensive use of the  
appliance may call for additional  
ventilation, for example opening of  
a window, or more effective  
ventilation, for example increasing  
the level of mechanical ventilation  
where present.  
The symbol  
on the product or  
on its packaging indicates that this  
product may not be treated as household  
waste. Instead it shall be handed over to  
the applicable collection point for the  
recycling of electrical and electronic  
equipment. By ensuring this product is  
disposed of correctly, you will help  
prevent potential negative consequences  
for the environment and human health,  
which could otherwise be caused by  
inappropriate waste handling of this  
product. For more detailed information  
about recycling of this product, please  
contact your local city office, your  
household waste disposal service or the  
shop where you purchased the product.  
• Once you removed all packaging from  
the appliance, ensure that it is not  
damaged and the electric cable is in  
perfect conditions. Otherwise, contact  
your dealer before proceeding with the  
installation.  
The manufacturer disclaims any  
responsability should all the safety  
measures not be carried out.  
It is very important that this  
instruction book should be kept  
safely for future consultation. If  
the appliance should be sold or  
given to another person, please  
ensure that the booklet goes  
together with it, so that the new  
owner can know of the functions  
of the machine and also be aware  
of the warnings.  
Service  
• Under no circumstances should you  
attempt to repair the appliance  
yourself. Repairs carried out by  
unexperienced persons may cause  
injury or serious malfunctioning. Refer  
to your local Service Centre. Always  
insist on genuine spare parts.  
5
 
Description of the appliance  
2
2
3
1
4
1
2
3
4
Auxiliary burner  
Semi-rapid burner  
Triple crown burner  
Control knobs  
6
 
the "off" position and wait for  
at least 1 minute before trying  
to light the burner again.  
Operation  
Hob burner control knobs  
To switch off burners  
The symbols on the knobs mean:  
= no gas supply  
To put the flame out, turn the knob to  
the symbol ().  
= maximum gas supply  
Take care when frying food in  
hot oil or fat, as the overheated  
splashes could easily ignite.  
= minimum gas supply  
When switching on the mains, after  
installation or a power cut, it is quite  
normal for the spark generator to be  
activated automatically.  
Foreasierlighting, proceedbefore  
putting a pan on the pan support.  
Lighting the burners  
To light a burner, turn the relevant  
knob anticlockwise to maximum  
position (  
to ignite.  
) and push down the knob  
After lighting the flame, keep the  
knob pushed down for about 5  
seconds. This will allow the  
"thermocouple" to be heated and the  
safety device to be switched off,  
otherwise the gas supply would be  
interrupted. Then, check the flame is  
regular and adjust it as required.  
If you cannot light the flame even  
after several attempts, check the "cap"  
and “crown” are in the correct position.  
In the absence of electricity, ignition  
can occur without the electrical device;  
in this case approach the burner with a  
flame, push the relevant knob down and  
turn it anti-clockwise until it reaches the  
"maximum" position.  
A - Burner cap  
B - Burner crown  
C - Ignition candle  
D - Thermocouple  
Triple crown  
A
B
Do not keep the control knob  
pressed for more than 15  
seconds. If the burner does not  
light even after 15 seconds,  
release the control knob, turn  
it the "off" position and wait for  
at least one minute before  
trying to light the burner again.  
If the burner accidentally goes  
out, turn the control knob to  
D
C
7
 
Using the hob correctly  
Practical hints  
The burners  
To ensure maximum burner • If the control knobs become difficult to  
turn, please contact your local Service  
Force Centre.  
• As soon as a liquid starts boiling, turn  
down the flame so that it will barely  
keep the liquid simmering.  
efficiency, you should only use pots and  
pans with a flat bottom fitting the size of  
the burner used.  
Triple Crown Burner  
diameter 18-26 cm  
Front Semi-rapid Burner  
diameter 12-18 cm  
Rear Semi-rapid Burner  
diameter 12-22 cm  
Auxiliary Burner  
diameter 8-16 cm  
• For easier lighting, proceed before  
putting a pan on the pan support.  
• Use only pans or pots with flat bottom.  
Take care when frying food in hot  
oil or fat, as the overheated  
splashes could easily ignite.  
• If you use a saucepan which is smaller  
than the recommended size, the flame  
will spread beyond the bottom of the  
vessel, causing the handle to overheat.  
• Prolonged  
cooking  
with  
potstones, earthenware pans or  
cast-iron plates is inadvisable.  
Also, do not use aluminium foil to  
protect the top during use.  
Make sure pots do not protrude over  
the edges of the cooktop and that they  
are centrally positioned on the rings in  
order to obtain lower gas  
consumption.  
• Do not place unstable or deformed  
pots on the rings: they could tip over or  
spill their contents, causing accidents.  
Pots must not enter the control  
zone.  
8
 
Cleaning and Mainteinance  
Disconnect the appliance from  
the electrical supply, before  
carrying out any cleaning or  
manteinance work.  
The hob is best cleaned whilst  
it is still warm, as spillage can  
be removed more easily than if  
it is left to cool.  
This appliance cannot be  
cleaned with steam or with a  
steam cleaning machine.  
The burners  
The burner caps and crowns can be  
removed for cleaning.  
Wash the burners taps and crowns  
using hot soapy water, and remove  
marks with a mild paste cleaner. A  
well moistened soap impregnated  
steel wool pad can be used with  
caution, if the marks are particularly  
difficult to remove.  
After cleaning, be sure to wipe dry  
with a soft cloth.  
Frequently wash the "caps" and the  
"crowns" with hot soapy water,  
carefully taking away any built-up of  
food.  
YES  
NO  
The pan supports  
The pan supports are not  
dishwasher proof; they MUST be  
washed by hand.  
After cleaning, make sure that the  
pan supports are correctly  
positioned.  
To make burners work properly,  
ensure that pan supports are placed  
in a way that the arms are centred  
upon the burner as shown in the  
picture.  
Pay attention when replacing the  
pan supports in order to avoid  
damaging the hob top.  
9
 
The Hob Top  
Regularly wipe over the hob top  
using a soft cloth well wrung out in  
warm water to which a little wasing  
up liquid has been added. Avoid the  
use of the following:  
- household detergent and bleaches;  
- impregnated pads unsuitable for  
non-stick saucepans;  
- steel wool pads;  
- bath/sink stain removers.  
Should the hob top become heavily  
soiled, the following products are  
recommended:  
- For stainless steel hobs use a  
proprietary stainless steel cleaner.  
- For other hobs use Hob Brite or Bar  
Keepers Friend.  
Do not leave acid or alkaline  
substances (e.g. vinegar, salt,  
lemon juice, etc.) on the cooktop.  
The Ignition electrode  
The electric ignition is obtained  
through a ceramic electrode with a  
metal electrode inside (Fig. page 7 - C).  
Keep these components very clean, to  
avoid difficult lighting, and check that  
the burner crown holes (Fig. page 7 - B)  
are not obstructed.  
10  
 
Technical data  
Cut out dimensions  
(see chapter “Building In”)  
Width:  
Heat Input  
Triple Crown burner  
Semi-rapid burner  
Auxiliary burner  
4,0 kW  
2,0 kW  
1,0 kW  
560 mm  
480 mm  
Depth:  
Overall dimensions  
Electric supply:  
Category:  
230 V ~ 50 Hz  
II2H3+  
Width:  
Depth:  
594 mm  
510 mm  
Gas supply:  
Appliance class  
LPG 28-30 / 37 mbar  
3
BURNER  
NORMAL  
POWER  
kW  
REDUCED  
POWER  
kW  
NORMAL POWER  
NATURAL POWER  
LPG  
28-30/37 mbar  
m3/h  
g/h  
inj.  
inj.  
G20  
G30  
73  
G31  
71  
100/mm  
20 mbar  
100/mm  
Auxiliary  
1,0  
2,0  
4,0  
0,33  
0,45  
1,2  
70  
96  
0,095  
50  
Semi-rapid  
Triple crown  
0,190  
0,381  
71  
98  
145  
291  
143  
286  
146  
By-pass diameters  
Burner  
Ø By-pass in 1/100 mm.  
Auxiliary  
28  
32  
56  
Semi-rapid  
Triple crown  
11  
 
Installation  
The following instructions about  
installation and maintenance must  
be carried out by qualified  
personnel in compliance with the  
regulation in force.  
The appliance must be electrically  
disconnected  
before  
all  
interventions. If any electric supply  
to the appliance is required to  
carry out the work, ensure all the  
necessary precautions are  
followed.  
The side walls of the unit in which  
the hob is going to be installed,  
must not exceed the height of the  
working top.  
Avoid installing the appliance in  
the proximity of inflammable  
materials (e.g. curtains, tea towels  
etc.).  
THE MANUFACTURER WILL NOT  
ACCEPT LIABILITY, SHOULD ANY OF  
THE OTHER SAFETY INSTRUCTIONS  
INCORPORATED IN THIS BOOKLET  
OR THE REGULATION IN FORCE BE  
IGNORED.  
12  
 
Gas Connection  
Connection to the gas supply should be  
with either rigid or semi-rigid pipe, i.e.  
steel or copper.  
The connection should be suitable for  
connecting to RC 1/2 (1/2 BSP male  
thread).  
Important  
When the final connection has been  
made, it is essential that a thorough leak  
test is carried out on the hob and  
installation. Use some soapy water,  
never a flame.  
Ensure that the main connection pipe  
does not exert any strain on the hob.  
A) End of shaft with nut  
B) Washer  
C) Elbow  
It is important to install the elbow  
correctly, with the shoulder on  
the end of the thread, fitted to the  
hob connecting pipe.  
Failure to ensure the correct  
assembly will cause leakage of  
gas.  
Conversion from LPG to Natural Gas  
IMPORTANT  
The replacement/conversion of the gas  
hob should only be undertaken by a  
competent person.  
It is important to note that this model is  
designed for use with LPG gas but can  
be converted for use with Natural gas  
providing the correct injectors are fitted  
and the gas rate is adjusted to suit.  
Replace the rating label (placed near the  
gas supply pipe) with the relevant one  
for the new type of gas supply. You can  
find this label in the package of the  
injectors supplied with the appliance.  
13  
 
A. Injectors replacement  
• Ensure that the gas taps are in the  
'OFF' position  
• Isolate the hob from the electrical  
supply  
• Remove all pan supports, burner  
caps, rings, crowns and control  
knobs.  
• With the aid of a 7mm box spanner  
the burner injectors can then be  
unscrewed and replaced by the  
appropriate Natuaral gas injectors  
(Fig.1).  
Fig. 1  
B. Adjustment of minimum  
level  
When the hob has been fully installed it will  
be necessary to check the minimum flame  
setting. To do this, follow the procedure  
below.  
-
Turn the gas tap to the MAX position  
and ignite.  
Set the gas tap to the MIN flame  
position then turn the control knob  
from MIN to MAX several times. If the  
flame is unstable or is extinguished  
follow the procedure below.  
-
Procedure:  
To adjust the minimum level of the  
burners, proceed as follows:  
Light the burner.  
Turn the knob on the minimum  
position.  
Remove the knob.  
With a thin screwdriver, adjust the by-  
pass screw (Fig.2).  
Fig. 2  
Minimum adjustment screw  
If changing from LPG to natural gas  
unscrew about 1/4 turn the by-pass  
screw, until a small regular flame is  
obtained.  
If changing from natural gas to LPG,  
completely tighten clockwise the  
screw, until a small regular flame is  
obtained.  
Finally check the flame does not go  
out when quickly turning the knob  
from the maximum position to the  
minimum position.  
This procedure can easily be carried out,  
anyhow the hob has been positioned or  
built in the working top.  
Repeat the adjustment procedure for  
all burners.  
14  
 
Electrical Connection  
The appliance is designed to be  
connected to 230 V monophase  
electricity supply.  
The connection must be carried out  
in compliance with the laws and  
regulations in force.  
Before the appliance is connected:  
1) check that the main fuse and the  
domestic installation can support the  
load (see the rating label);  
2) check that the power supply is  
properly earthed in compliance with the  
current rules;  
3) check the socket or the double  
pole switch used for the electrical  
connection can be easily reached with  
the appliance built in the forniture unit.  
The appliance is supplied with a  
connection cable and the relevant plug.  
The plug has to be fitted in a proper  
socket.  
If connecting the appliance directly to  
the electric system, it is necessary that  
you install a double pole switch between  
the appliance and the electricity supply,  
with a minimum gap of 3 mm. between  
theswitchcontactsandofatypesuitable  
for the required load in compliance with  
the current rules.  
Theconnectioncablehastobeplaced  
in order that, in each part, it cannot reach  
a temperature higher than 90°C.  
The brown coloured phase cable  
(fitted in the terminal block contact  
marked with "L") must always be  
connected to the network phase.  
15  
 
Remplacement of the voltage  
cable  
The connection of the voltage cable  
to the appliance's terminal block is of  
type "Y". This means that its  
replacement requires the specific  
equipment of a technician. In this case,  
only cable type H05V2V2-F T90 must  
be used. The cable section must be  
suitable to the voltage and the working  
temperature. The yellow/green earth  
wire must be approximately 2 cm longer  
than the phase wires (Fig. 3-a).  
To open the terminal block and  
reach the terminals, proceed as  
follows:  
Neutral  
Earth  
(yellow/green))  
Fig. 3-a  
Fig. 3-b  
insert the point of a screwdriver into  
the visible protrunding part of the  
terminal block;  
exert a light pressure and lift (Fig. 3-  
b).  
WARNING: The supply cable  
replacement MUST only be  
carried out by QUALIFIED  
PERSONNEL.  
16  
 
Building In  
SR  
SR  
TC  
A
Fig. 4  
Dimensions are given in millimeters  
A = Auxiliary burner  
SR= Semi-rapid burner  
TC= Triple Crown burner  
These hobs can be inserted in a  
built-in kitchen unit whose depth is  
between 550 and 600 mm.  
The hobs dimensions are shown in  
Fig. 4; the cut out dimensions are  
shown in Fig. 5.  
The edge of the cut out must have a  
minimum distance from the rear wall of  
55 mm.  
If there are side walls, or sides of the  
furniture unit near the hob, the cut out  
edges must have a minimum distance of  
100 mm.  
Hanging forniture units or hoods  
must be placed at 650 mm minimum  
from the hob.  
Fitting the hob to the worktop  
Carry out the building in of the hob  
as follows:  
Fig. 5  
1. Place the seals supplied with the hob  
on the front edge of the cut out.  
17  
 
Then, place them at 11 mm from the  
side edges and at 10 mm from the  
rear edge, as shown in Fig. 6, taking  
care that the seals meet without  
overlapping.  
2. Place the hob in the cut out, taking  
care that it is centred.  
3. Fix the hob with the relevant fixing  
clamps, supplied with the injectors  
kit (see diagram). When the screws  
have been tightened, the excess seal  
can be removed.  
Fig. 6  
a
The edge of the hob forms a double  
seal which prevents the ingress of  
liquids.  
Fig.7  
a) seal  
Possibilities for insertion  
Kitchen unit with door  
Proper arrangements must be taken  
in designing the forniture unit, in order to  
avoid any contact with the bottom of the  
hob which can be heated when it is  
operated. The recommended solution is  
shown in Fig. 8. The panel fitted under  
the hob should be easily removable to  
allow an easy access if a technical  
assistance intervention is needed.  
Fig. 8  
a) Removable panel  
b) Space for connections  
18  
 
Kitchen unit with oven  
The hob recess dimensions must  
comply the indication given in Figs. 9  
and 10 and must be provided with  
brackets to allow a continuous supply of  
air.  
The hob's electric connection and  
the oven's one must be carried out  
separately, both for safety reasons and  
to allow the oven to be easily taken off  
the unit.  
Wall units or extractor hoods must be  
at least 650 mm from the cooktop (Fig. 5).  
Fig. 9  
Service and original  
spare parts  
This machine, before leaving the  
factory, has been tested and studied by  
many experts and specialists, in order to  
give you the best results.  
Fig. 10  
Any repair work which needs to be  
carried out should be done with the  
utmost care and attention.  
For this reason we recommend that  
for any problem you contact the dealer  
who sold it to you, or our nearest  
authorized Service Centre, specifying the  
nature of the problem, the appliance  
model (Mod.), the product number (Prod.  
No.) and the serial number (Ser. No.)  
marked on the identification plate supplied  
in the injectors kit.  
Original spareparts, certified by the  
product manufacturer and carrying this  
symbol are only  
available at our  
Service Centre and  
authorized spareparts  
shops.  
19  
 
3971350.01  
05/09 R.A  
 

Graco Inc Paint Sprayer 222700 User Manual
Grandstream Networks Security Camera GXV3611 User Manual
Hasselblad Digital Camera 503CW CFV User Manual
Honeywell Video Gaming Accessories W7750A User Manual
Hotpoint Clothes Dryer AQC9 BF7 User Manual
HP Hewlett Packard Digital Camera M22 User Manual
HP Hewlett Packard Video Game Console 10529A User Manual
Hunter Fan Fan 21543 User Manual
Impex Fitness Equipment MWB 682 User Manual
Impex Home Gym MP 2100 User Manual